american accurate components, inc. thick film chip resistors 188 technology drive unit h, irvine, ca 92618 tel: 9494539888 fax: 9494538889 email: sales@aacix.com 1 schematic wrap around terminal cr, cj, type dimensions (mm) size size code l w c d t 01005 00 0.40 + 0.03 0.20 + 0.03 0.10 + 0.05 0.10 + 0.05 0.13 + 0.05 0201 20 0.60 + 0.03 0.30 + 0.03 0.10 + 0.05 0.15 + 0.05 0.23 + 0.03 0402 05 1.00 +0.10.05 0.50+ 0.05 0.20 + 0.10 0.25+ 0.10 0.35 + 0.05 0603 16 1.60 + 0.10 0.80 + 0.10 0.30 + 0.20 0.30+0.200.10 0.45 + 0.10 0805 10 2.00 + 0.10 1.25 + 0.10 0.40 + 0.20 0.40 + 0.20 0.50 + 0.10 1206 18 3.10 + 0.10 1.55 + 0.10 0.50 + 0.30 0.40 + 0.20 0.55 + 0.10 1210 14 3.10 + 0.10 2.55 + 0.10 0.50 + 0.30 0.40 + 0.20 0.60 + 0.10 2010 12 5.00 + 0.15 2.50 + 0.15 0.60 + 0.30 0.50+ 0.25 0.60 + 0.10 2512 01 6.30 + 0.20 3.20 + 0.20 0.60 + 0.30 0.50+ 0.25 0.60 + 0.10 2512p 01p 6.30 + 0.20 3.20 + 0.20 0.60 + 0.30 0.50+ 0.25 0.60 + 0.10 electrical specifications for chip resistors size 01005 0201 0402 0603 0805 power rating (eia 575) 1/32w 1/20w 1/16w 1/10w 1/8w max. working voltage* 15v 25v 50v 50v 150v max. overload voltage 30v 50v 100v 100v 300v operating temp. 70c 70c 70c 70c 70c size 1206 1210 2010 2512 power rating (eia 575) 1/4w 1/3w 1/2w 1w max. working voltage* 200v 200v 200v 200v max. overload voltage 400v 400v 400v 400v operating temp. 70c 70c 70c 70c how to order cr 10 1003 f m packaging m = 7 reel o = cutting tape b = bulk k = sample kit tolerance (%) j = + 5 f = + 1 g = + 0.5 d = + 0.1 eia resistance value standard decade values size 20 = 0201 10 = 0805 01p = 2512p 05 = 0402 18 = 1206 00 = 01005 16 = 0603 14 = 1210 12 = 2010 01 = 2512 series cj = jumper cr = resistor wrap around termination material: sn ceramic substrate resistive element overcoat conductor features excellent stability over a wide range of environmental conditions small size to 01005 rohs compliance
american accurate components, inc. thick film chip resistors 188 technology drive unit h, irvine, ca 92618 tel: 9494539888 fax: 9494538889 email: sales@aacix.com 2 size tcr (ppm/ c) tolerance (%) and resistance d(0.1%) & e96 & e24 g(0.5%) & e96 & e24 f(1%) & e96 & e24 j(5%) & e24 01005 300 10r<100 10r<100 200 100r<1m 100r<1m 0201 200 10010k 102m 1010m +600 200 19.1 19.1 0402 100 100499k 1001m 1001m 200 10100 10100 10r<100 1m american accurate components, inc. thick film chip resistors 188 technology drive unit h, irvine, ca 92618 tel: 9494539888 fax: 9494538889 email: sales@aacix.com 3 derating curve for resistors operated at ambient temperature over 70, power rating shall be derated in accordance wi th figure 1. the rated voltage is calculated by the following fo rmula: e= p * r e= rated voltage(v), p= rated power(w), r= resistance value () reliability tests test items reference standard condition of test test limits ?r temperature coefficient of resistance iec6011514.8 jisc520114.8 55~+125 c refer 5.0 short time overload iec6011514.13 jisc520114.13 2.5 x rate voltage for 5 sec (1% + 0.05) remarks: 0201 : (3% + 0.1) 0402 : (2% + 0.1) 0 : 50m or less intermittent overload iec6011514.39 jisc520114.39 3.0 x rated voltage or max overloading voltage, 1sec on, 25sec off, 10000 cycles remarks: 0201na, 0402 2.5 x rcwv*) (5.0% + 0.1) 0 : 50m or less endurance (load life) iec6011514.25.1 jisc52011 4.25.1 1000 hours at rated voltage, 70c, 1.5hours on, 0.5hour off 0.1%, 0.5%, 1% : (1.0% + 0.05) 2%, 5% : (3.0%+ 0 .1) remarks: 0201 : (5% + 0.1) 0402 : (3% + 0.1) 0 : 100m or less load life with humidity iec6011514.24 jisc520114.24 1000 hours at rated voltage, 402c, 90~95% rh 1.5hours on, 0.5hour off 0.1%, 0.5%, 1% : (1.0% + 0.05) 2%, 5% : (3.0%+ 0 .1) remarks: 0201 : (5.0% + 0.1) 0402 : (3.0% + 0. 1) 0 : 100m or less rapid change of temperature iec6011514.19 jisc520114.19 55c (30 min.) / +155c (30 min.) 5 cycles 0.1%, 0.5%, 1% : (0.5% + 0.05) 2%, 5% : (1.0%+0. 05) remarks: 0201 : (3% + 0.1) 0 : 50m or less solderability iec6011514.17 jisc520114.17 2455c solder, 20.5 sec dwell. solder: sn96.5 / ag3.0 / cu0.5 at least 95% of surface area of electrode shall be covered with new solder robustness of termination (bending) iec6011514.33 jisc520114.33 3mm deflection 2mm deflection (rm20,25) 0.1%, 0.5%, 1% : (0.5% + 0.05) 2%, 5% : (1.0%+0. 05) remarks: 0201 : (1.0% + 0.1) 0 : 50m or less dielectric withstanding voltage (voltage proof) iec6011514.7 jisc520114.7 applying voltage: 0201: 50v, 0402 & 0603: 300v the other 500v for a minute no abnormalities such as flashover, burning dielect ric breakdown shall appear insulation resistance iec6011514.6 jisc520114.6 applying voltage 100v for 1 minute. remark: 0201 50v 1g resistance to dry heat iec6011514.23.2 jisc52011 4.23.2 1555c for 964hours remark: 0201 1255c 0.1%, 0.5%, 1% : (1.0% + 0.05) 2%, 5% : (2.0% + 0.1) remarks: 0201 : (2.0% + 0.1) 0 : 50m or less resistance to solder heat iec6011514.18 jisc520114.18 2705c solder, 101 sec dwell. 0.1%, 0.5%, 1% : (0.5% + 0.05) 2%, 5% : (1.0% + 0.05) remarks: 0201 : (3.0% + 0.1) 0 : 50m or less note: rcwv: rated continuous working voltage figure 1
american accurate components, inc. thick film chip resistors 188 technology drive unit h, irvine, ca 92618 tel: 9494539888 fax: 9494538889 email: sales@aacix.com 4 eia standard values decade values in the eia standard e24 series: 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 decade values in the eia standard e 96 series: 1.00 2.10 4.22 8.25 16.9 32.4 59.0 1.02 2.15 4.32 8.45 17.4 33.0 60.4 1.05 2.20 4.42 8.56 17.8 33.2 61.9 1.07 2.21 4.53 8.87 18.0 34.0 62.0 1.10 2.26 4.64 9.09 18.2 34.8 63.4 1.13 2.32 4.70 9.31 18.7 35.7 64.9 1.15 2.37 4.75 9.53 19.1 36.0 65.5 1.18 2.43 4.87 9.76 19.6 36.5 68.0 1.21 2.49 4.99 10.0 20.0 37.4 68.1 1.24 2.56 5.11 10.2 20.5 38.3 69.8 1.27 2.61 5.23 10.5 21.0 39.0 71.5 1.30 2.67 5.36 10.7 21.5 39.2 73.2 1.33 2.74 5.49 11.0 22.0 40.2 75.0 1.37 2.80 5.60 11.3 22.1 41.2 76.8 1.40 2.87 5.62 11.5 22.6 42.2 78.7 1.43 2.94 5.76 11.8 23.2 43.0 80.6 1.47 3.00 5.90 12.0 23.7 43.2 82.0 1.50 3.01 6.04 12.1 24.0 44.2 82.5 1.54 3.09 6.19 12.4 24.3 45.3 84.5 1.58 3.16 6.20 12.7 24.9 46.4 86.6 1.62 3.24 6.34 13.0 25.5 47.0 88.7 1.65 3.32 6.49 13.3 26.1 47.5 90.9 1.69 3.40 6.65 13.7 26.7 48.7 91.0 1.74 3.48 6.80 14.0 27.0 49.9 93.1 1.78 3.57 6.81 14.3 27.4 51.0 95.3 1.80 3.65 6.98 14.7 28.0 51.1 97.6 1.82 3.74 7.15 15.0 28.7 52.3 1.87 3.83 7.35 15.4 29.4 53.6 1.91 3.90 7.50 15.8 30.0 54.9 1.96 3.92 7.68 16.0 30.1 56.0 2.00 4.02 7.87 16.2 30.9 56.2 2.05 4.12 8.06 16.5 31.6 57.6 those items in a shaded box are also e24 values an d will be marked with the eia 3 digit code. value marking for those parts ordered with an e24 value, the pro duct will be marked with a 3 digit code. for those products ord ered with an e96 value, the product will be marked with a 4 dig it code. for those parts which fall under e96 and e24 values ( e.g. 1k ohm is both an e96 and e24 value), the part will be m arked with a 3 digit code; 4 digit markings for this type is avail able upon special request. 01005, 0201, and 0402 size no marking e24 & e96 values 0603 size eia 96 digit code of 3.32k ohm e96 values 0603, 0805, 1206, 1210, 2010, 2512 sizes eia 3 digit code of 10k ohm resistor e24 values, e96 values 0805, 1206, 1210, 2010 , 2512 sizes eia 4 digit code of 121k ohm resistor e96 values 0603 marking code for e96 values by combining a specific two digit number and a lett er code, you have a series of numeric/alpha digits that give you the complete (e96) resistance value codes for 0603 size part mar king. value code value code value code value code 10.0 01 17.8 25 31.6 49 56.2 73 10.2 02 18.2 26 32.4 50 57.6 74 10.5 03 18.7 27 33.2 51 59.0 75 10.7 04 19.1 28 34.0 52 60.4 76 11.0 05 19.6 29 34.8 53 61.9 77 11.3 06 20.0 30 35.7 54 63.4 78 11.5 07 20.5 31 36.5 55 64.9 79 11.8 08 21.0 32 37.4 56 66.5 80 12.1 09 21.5 33 38.3 57 68.1 81 12.4 10 22.1 34 39.2 58 69.8 82 12.7 11 22.6 35 40.2 59 71.5 83 13.0 12 23.3 36 41.2 60 73.2 84 13.3 13 23.7 37 42.2 61 75.0 85 13.7 14 24.3 38 43.2 62 76.8 86 14.0 15 24.9 39 44.2 63 78.7 87 14.3 16 25.5 40 45.3 64 80.6 88 14.7 17 26.1 41 46.4 65 82.5 89 15.0 18 26.7 42 47.5 66 84.5 90 15.4 19 27.4 43 48.7 67 86.6 91 15.8 20 28.0 44 49.9 68 88.7 92 16.2 21 28.7 45 51.1 69 90.9 93 16.5 22 29.4 46 52.3 70 93.1 94 16.9 23 30.1 47 53.6 71 95.3 95 17.4 24 30.9 48 54.9 72 97.6 96 letter multiplier cross reference a =10 c = 1,000 e = 100,000 x = 1 b = 100 d = 10,000 f = 1,000,000 y = 0.1 0603 code explanation value 01b 01 = 10.0 & b = 100 10.0x100 = 1k 25c 25 = 17.8 & c = 1,000 17.8x1,000 = 17.8k 93d 93 = 90.9 & d = 10,000 90.9 x 10,000 = 909k package quantity type 01005 0201 0402 0603 0805 b 25,000 10,000 m 15,000 10,000 10,000 5,000 5,000 v 40,000 40,000 20,000 20,000 type 1206 1210 2010 2512 b 5,000 m 5,000 5,000 4,000 4,000 v 20,000 20,000 20,000 20,000 51b 1213 103
american accurate components, inc. thick film chip resistors 188 technology drive unit h, irvine, ca 92618 tel: 9494539888 fax: 9494538889 email: sales@aacix.com 5 tape schematic 01005 size a b w f e 0.38 0.02 0.68 0.02 8.0 0.10 3.5 0.05 1.75 0.05 p1 p0 d0 t1 t2 k 2.0 0.05 4.0 0.10 1.55 0.03 0.42 0.05 0.5 0.27 0.02 0201 ~ 2512 size tape dimensions (mm) 0201 0402 0603 0805 a 0.37 0.05 0.65 0.1 1.1 0.2 1.65 0.2 b 0.67 0.1 1.15 0.1 1.9 0.2 2.4 0.2 w 8.0 0.2 8.0 0.2 8.0 0.2 8.0 0.2 e 1.75 0.1 1.75 0.10 1.75 0.1 1.75 0.1 f 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 p 1 2.0 0.1 2.0 0.05 4.0 0.1 4.0 0.1 t 0.5 max 0.55 0.1 0.70 0.1 0.90 0.1 t p 0.4+ 0.05 0.40 0.05 0.60 0.1 0.75 0.1 1206 1210 2010 2512 a 2.0 0.15 2.9 0.1 2.9 0.1 3.4 0.1 b 3.6 0.15 3.5 0.1 5.3 0.1 6.6 0.1 w 8.0 0.2 8.0 0.2 12.0 0.2 12.0 0.2 e 1.75 0.1 1.75 0.1 1.75 0.1 1.75 0.1 f 3.5 0.05 3.5 0.05 5.5 0.05 5.5 0.05 p 1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 t 0.90 0.1 0.90 0.1 1.0 0.1 1.0 0.1 t p 0.75 0.1 0.75 0.1 0.25 0.1 0.25 0.1 tape type resistor size press pocket carrier tape 01005 rect. punching carrier paper tape 0201, 0402, 0603, 0805, 1206, 1210 plastic (embossed tape) 2010 & 2512 reel drawings 7 reel (m) 13 reel (v) package dimensions (mm) 7 reel (m) 13 reel (v) m 180 3.0 330 2.5 h 1.20 2.3 0.5 c 13.0 0.2 13.0 0.2 g 9.0 0.3 9.5 0.5 e 60 1.0 80.0 1.0 f 11.4 1.0 14.4 label description one side surface of a reel is marked with a label w ith the following items of information. 1. chip resistor 2. part number 3. tolerance 4. quantity 5. lot number for production month/year/suffix l* 6. manufacturers name or symbol * the suffix l indicates that this item is lead f ree. as of september 2004, all new production items of the series cr and cj are no longer containing tin/lead (snpb) terminals; they a re lead free and in compliance with lead free/rohs. package construction 3 ring binder case holder plastic pages with slip holders for each value each value is individually identified in a slip h older resistors are packaged on paper tape strips the content may change without notification 7/21/ 2016.
|
